Low-profile retractable pool enclosure FLAT
The FLAT model is the benchmark of contemporary design among F-TECH pool enclosures. This premium enclosure is the lowest-profile model in the low-profile retractable enclosure range and is distinguished by clean geometric lines, minimalist design, and seamless integration into the contemporary architecture of private residences.
Advantages of the FLAT retractable pool enclosure:
- Flexible installation options: the enclosure can be configured with guide rails on both sides, as a single-rail system, or with partial guide rails.
- Aesthetics and minimalism: thanks to its minimal height, the retractable enclosure does not obstruct views of the surrounding landscape.
- Comprehensive protection: the enclosure effectively retains water heat, maintains pool cleanliness, and enhances safety.
The standard FLAT enclosure configuration includes
- removable end walls;
- spring-loaded section locking mechanisms;
- 16 mm high Comfort aluminium guide rails with concealed fixing;
- the option to install guide rails on only one side of the pool;
- UV-stabilised plastic handles by Elesa Ganter;
- side door.
Additional options available
- sliding door in the largest section or, optionally, in the smallest section (available only for selected enclosure models);
- small or large hinged flap in either the front or rear end wall;
- sliding door in the end wall;
- installation of guide tracks on one side only (available for the Flat enclosure);
- increased enclosure area to create additional space for a relaxation zone;
- modification of the enclosure height;
- modification of the standard section length;
- change of polycarbonate colour;
- profile colour change according to the RAL colour chart;
- selected parts of the structure can be replaced with solid or multiwall polycarbonate.
Enclosure materials
- Roof panels: ARLA PLAST polycarbonate (Sweden, Czech Republic).
- Light transmission: 82–90% (multiwall polycarbonate).
- Protection: dual-sided UV protection, resistant to rain, hail, and snow.
- Thermal insulation: high, reducing heat loss.
- Temperature range: from -40 °C to +120 °C.
- Warranty: 10 years against UV protection degradation.
- Profiles and guide tracks: AlMgSi 0.5 aluminium alloy.
- Standards: EN ISO 9002, EN ISO 14001.
- Profile finish: 21 μm anodised coating.
- Colour: powder coating according to the RAL colour chart (optional).
- Guide tracks: height 15–18 mm (depending on the model).
- Movement system: polyamide rollers with stainless steel bearings.
- Structure: robust, resistant to wind and snow loads.
- Hardware: stainless steel components integrated into the structure.
Dimensions FLAT
Advantages of the pool enclosure
FAQ about the Flat pool enclosure
What type of pool is the FLAT retractable enclosure suitable for?
The FLAT premium enclosure is suitable for private pools where it is important to preserve an open view of the yard and the modern architecture of the property. Thanks to its minimal height, it does not obstruct panoramic views and blends harmoniously with the landscape design.
How is the FLAT enclosure different from other low pool enclosures?
FLAT is the lowest model in the F-TECH range. It features clean geometric lines, a minimalist design, and a compact profile, making the enclosure virtually unobtrusive on the property without compromising the effectiveness of pool protection.
Can the FLAT enclosure be installed with guide rails on only one side of the pool?
Yes. One of the features of the FLAT model is the option to install guide rails on only one side of the pool, making the enclosure easier to use and allowing the structure to be adapted to the specific characteristics of the property.
Can the FLAT enclosure be made to custom dimensions?
Yes. The FLAT enclosure is custom-made to fit the dimensions of the pool. The length, width, height, number of sections, profile colour from the RAL range, and type of polycarbonate can be customised.